Device view

In the device control menu, we can find the following sections:

device overview

On the Overview tab you can see basic parameters like uptime, IP, CPU usage etc.

On the Relation tab you can set type of device (type should be created under Config → Networking → TR-069 → Types), group (should be created under Config → Networking → TR-069 → Groups as well) also the customer and their services can be linked to this device.

On Tasks tab you will see the pending tasks (like you run a wi-fi password change and task will be created).

On Faults tab you will see tasks what were executed with an errors.


After clicking the Actions button, you can find the following options:


  • Refresh - you can use it to refresh device connection between ACS and Splynx;
  • Reboot - remotely reboot a device;
  • Run provisioning - run provisioning for a device;
  • Send file - send some file to a device;
  • Factory reset - reset device to its factory settings;
  • Delete - delete this device from the ACS (if the device is connected to the network it will appear in the list again. First, disable the TR-069 client on the device if you do not want this device to appear on the ACS again).

At the bottom of the page there are additional tabs related to the router: WAN, LAN, NAT, FIREWALL, DIAGNOSES, ACTIVITY:

device setup

Switch between available tabs to configure the necessary parameters. As an example we can change a DHCP server parameters:

LAN tab

DHCP attributes

or add some firewall rules right here:

firewall rules

On the Diagnostic tab you can find such diagnostic tools as: ping, traceroute, upload/download statistic and wifi-analyzer:


To run some diagnostic tool click on Run button near each tool.

image This menu can differ depending on a device, e.g. Mikrotik router can be without а Wi-Fi module.

Wi-fi analyzer shows all the available wi-fi networks and its signal strength.

Debug logs can be found under Administration → Logs → Files (administration/logs/files) and find files by word genie: