Cambium: Wireless Authentication via Radius

Cambium access points have the ability to authenticate CPE's via a Radius server. This means that, admin's doesn’t have to maintain local passwords for wireless authentication, each CPE/radio can have its own account in the Splynx ISP Framework, and our Radius server will authenticate the Cambium CPE's.

All files required for this setup can be downloaded here: Cambium-Files

  1. Copy the "camb-ca.crt" file into the /etc/ssl/camb-ca.crt directory

  2. Copy the "cert-829.pem" file into the /etc/ssl/certs/cert-829.pem directory

  3. Copy the "key-829.pem" file to the /etc/ssl/private/key-829.pem directory

  4. Run the following command in the CLI of the server:

    chown root:ssl-cert /etc/ssl/private/key-829.pem

    As well as:

    chmod 640 /etc/ssl/private/key-829.pem
  5. Within the file: /etc/freeradius/3.0/mods-available/eap - find tls-config tls-common and edit it as follows:

tls-config tls-common {
#    private_key_password = *user-defined password*
    private_key_file = /etc/ssl/private/key-829.pem
    certificate_file = /etc/ssl/certs/cert-829.pem
    ca_file = /etc/ssl/camb-ca.crt    
  1. Within Splynx, navigate to Config / Networking / Radius extended - and set the following parameters:
Force network to use one NAS - YES
Network - Any network can be used
Default NAS Id - set correct NAS ID (Device that will show online users)

For Ubuntu 20.04 (from Splynx 3.1) you should add to file /etc/ssl/openssl.cnf: after line: oid_section = new_oids

openssl_conf = default_conf

[ default_conf ]
ssl_conf = ssl_sect

[ ssl_sect ]
system_default = system_default_sect

[ system_default_sect ]
MinProtocol = TLSv1